#MANUAL
# http://ham.zmailer.org/oh2mqk/aprx/aprx-manual.pdf

mycall  N5DUX-0

#
# Global macro for simplified "my location" definition in
# place of explicit "lat nn lon mm" at beacons. Will also
# give "my location" reference for "filter m/100".
#
#myloc lat ddmm.mmN lon dddmm.mmE
#myloc lat 3255.80N lon 09474.82W

<aprsis>
#login     OTHERCALL-7	# login defaults to $mycall

passcode 8578 

#server    rotate.aprs2.net
#server   euro.aprs2.net
#server   asia.aprs2.net
server   noam.aprs2.net
#server   soam.aprs2.net
#server   aunz.aprs2.net

# Some APRS-IS servers tell every about 20 seconds to all contact
# ports that they are there and alive. Others are just silent.
# Default value is 3*"heartbeat" + some  --> 120 (seconds)
#
#heartbeat-timeout   0    # Disabler of heartbeat timeout

# APRS-IS server may support some filter commands.
# See:  http://www.aprs-is.net/javAPRSFilter.aspx
#
# Usability of these filters for a Tx-iGate is dubious, but
# they exist in case you for example want to Tx-iGate packets
# from some source callsigns in all cases even when they are
# not in your local area.
#
#filter "possibly multiple filter specs in quotes"
#
#filter "m/100"	     # My-Range filter: positions within 100 km from my location
#filter "f/OH2XYZ-3/50"  # Friend-Range filter: 50 km of friend's last beacon position
</aprsis>

<logging>

# pidfile is UNIX way to tell that others that this program is
# running with given process-id number.  This has compiled-in
# default value of:  pidfile /var/run/aprx.pid
#
pidfile /var/run/aprx.pid

# rflog defines a rotatable file into which all RF-received packets
# are logged.  The host system can rotate it at any time without
# need to signal the aprx that the file has been moved.
#
rflog /var/log/aprx/aprx-rf.log

# aprxlog defines a rotatable file into which most important 
# events on APRS-IS connection are logged, namely connects and
# disconnects.  The host system can rotate it at any time without
# need to signal the aprx that the file has been moved.
#
aprxlog /var/log/aprx/aprx.log

</logging>

<interface>
serial-device /dev/ttyAMA0 19200 8n1 KISS 
callsign $mycall
tx-ok true
</interface>

<beacon>
#beaconmode { aprsis | both | radio }
beaconmode both
cycle-size  10m
beacon via SGATE\
	symbol "R&" \
	lat "3255.80N" \
	lon "09474.82W" \
	comment "RasPiTNC Rx-only iGate"
</beacon>
